I did follow the instructions on https://vitasdk.org/, but being new to Vita developing, I am not exactly sure if it is an issue with setting up the compilers or maybe it has to do with a quirk on Raspberry Pi's OS, but any help would be appreciated.-- The C compiler identification is unknown
-- The CXX compiler identification is unknown
-- Check for working C compiler: /usr/local/vitasdk/bin/arm-vita-eabi-gcc
-- Check for working C compiler: /usr/local/vitasdk/bin/arm-vita-eabi-gcc -- broken
CMake Error at /usr/share/cmake-3.6/Modules/CMakeTestCCompiler.cmake:61 (message):
The C compiler "/usr/local/vitasdk/bin/arm-vita-eabi-gcc" is not able to
compile a simple test program.
It fails with the following output:
Change Dir: /home/pi/VitaSamples/ctrl/CMakeFiles/CMakeTmp
Run Build Command:"/usr/bin/make" "cmTC_c1886/fast"
/usr/bin/make -f CMakeFiles/cmTC_c1886.dir/build.make
make: Entering directory '/home/pi/VitaSamples/ctrl/CMakeFiles/CMakeTmp'
Building C object CMakeFiles/cmTC_c1886.dir/testCCompiler.c.obj
/usr/local/vitasdk/bin/arm-vita-eabi-gcc -Wl,-q -o
/usr/local/vitasdk/bin/arm-vita-eabi-gcc: ELF: not found
/usr/local/vitasdk/bin/arm-vita-eabi-gcc: Syntax error: Unterminated quoted
CMakeFiles/cmTC_c1886.dir/build.make:65: recipe for target
make: *** [CMakeFiles/cmTC_c1886.dir/testCCompiler.c.obj] Error 2
make: Leaving directory '/home/pi/VitaSamples/ctrl/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_c1886/fast' failed
make: *** [cmTC_c1886/fast] Error 2
CMake will not be able to correctly generate this project.
Call Stack (most recent call first):
-- Configuring incomplete, errors occurred!
See also "/home/pi/VitaSamples/ctrl/CMakeFiles/CMakeOutput.log".
See also "/home/pi/VitaSamples/ctrl/CMakeFiles/CMakeError.log".
Problems with installing the SDK? Errors building? Non-code specific questions go here. Please check out https://vitasdk.org/ for instructions on setting up the SDK.
5 posts • Page 1 of 1
Currently trying to setup the SDK so I can mess around with some homebrew development, however when I try to build the samples, I get an error.
Oh wow, would have never thought of that. Thanks for the information. Haven't had time recently to mess around with it, but am looking forward to getting started
I am willing to set up on desktop, just was curious about setting up on Pi. My desktop is Windows and, though there is directions to install on Windows, I like to work on Linux when I can. Also, always looking for things to do with my Raspberry Pi
Who is online
Users browsing this forum: No registered users and 1 guest